KOIO Electric Chain Hoist

Compared with Electric Wire Rope Hoist CD1 or MD1 series, KOIO series Electric Chain Hoist has following features:
1)Light dead weight;
2)Small limit size;
3)Safer,more reliable and lower fault rate;
4)Running in chain wheel,the chain is free from dropping off and jumping so that it is more stable;
5)Low noise,strong overload capacity and large torque. 

 

The detailed introduction is as follows:;

1)      The switch is 4 push button station with mushroom On/Off;

2)      The operating voltage is 24V/36V;

3)      Brake will be immediately performed by automatic brake during emergency power cut;

4)      The lifting chain is G80 galvanized or cementite（black）heat treatment alloyed ones;

5)      Dual breaking system is safe and reliable;

6)      Both lifting and dropping are protected with limit switches,to prevent from exceeding the limits;

7)      Special anti-phase power protective device is available for control over-failure of circuit for work during wrong power connection.

8)      The voltage and frequency is 220V/380V,50Hz,3Phase,our company could modify the technical data according the client`s requirement;

The guarantee time:at least one year if the user operate and maintain the equipment by correctly.